Expert Answers about Dutchmen RV Leveling Blocks
- How Many Blocks are Included in the FasTen RV Leveling Blocks # CAM44512 and How Tall are They?
- The FasTen RV Leveling Blocks # CAM44512 includes 10 blocks. They are 8-1/2" x 8-1/2" wide and long and they are 1-1/2" think. Each block will provide 1" of lift for your trailer.
Please not that you should not exceed 4-1/2" of total height with these.
view full answer... - Does the Stackers Leveling Blocks w/ Bag for Trailers and RVs Come with Wheel Chocks
- The Stackers Leveling Blocks w/ Bag for Trailers and RVs part # A10-0920 does not come with any wheel chocks. That said, we do offer this separately using the Wheel Chock for Stackers Leveling Blocks part # A10-0922.
view full answer... - Weight of the Stackers Leveling Blocks for RV Tires, Jacks, and Stabilizers
- The Stackers Leveling Blocks for Trailers and RVs - 1-3/8" x 8-1/8" - Qty 4 # A10-0916 weigh approximately 4 lbs or just under 1 lb each. I've attached a couple review videos of this product to assist.
view full answer... - Does the Leveling Block Come with the Saris Fluid Bike Trainer
- It sounds like you're referring to the Leveling Block for Saris Bike Trainers # SA9702T, which is not included with the Saris Fluid² Turbo Bike Trainer with Smart Speed Sensor # SA9907T but is available as an add on purchase since it is not a required part. The Leveling Block # SA9702T is a great addition to keep your bike level and firmly in place during your training sessions and is compatible with any bike trainer.
view full answer... - Recommended Replacement Standard Bearing Block For Schwinntec Inverted Slide System
- When it comes to The Bearing Block for your Schwinntec inverted slide system The Lippert Replacement Standard Bearing Block Kit for RV In-Wall Slide-Out # LC379060.
This system will replace the standard bearing block kit for Lippert In-wall slide-out systems. We do not currently have any other parts that will work for you.
view full answer... - Contents Of Hopkins Leveling Kit For Trailers And RVs
- The Hopkins Leveling Kit w/Wheel chock for Trailers and RVs, Item # HM08200, is a sturdy kit that makes it easy to create a level position for your trailer or RV. This heavy-duty kit includes 4 ramps, 2 docks, one wheel chock, one traction mat, and the screws needed to attach ramps and docks to wood (not included). With the flexibility of all these parts, you can created different combinations needed to level your trailer or RV.
I have included a video for you to check out.
view full answer... - Does the Blue Ox Tail Light Wiring Kit with Block Diode # BX8811 Come With a 4-Way Connector
- The Blue Ox Tail Light Wiring Kit with Block Diode # BX8811 that you referenced does not come with a 4-Way connector as you stated.
To add a 4-Way connector you can simply use the Hopkins Wiring Harness with 4-Pole Flat Trailer Connector # HM38138 and connect it to your current wiring using Butt Connectors # DW05744-5.
For a look that is a little more clean and will provide you with a 7-Way to connect to your RV you can use the Hopkins Nite-Glow Tow Bar Extension Cord w/ Socket - Coiled...
view full answer... - Does Stromberg/Carlson Exterior RV Ladder LA-401 Include Support Stand-Offs
- Yes, the Stromberg Carlson RV Exterior Ladder # LA-401 comes with 4 supports (often called stand-offs) as well as 2 hinges (use of which is optional) and mounting hardware, all of which is shown in the linked photo.
The legs of the ladder can be trimmed down with a hacksaw or tube cutter. When you are installing mounting brackets and support pegs, make certain that all screws are fastened to the RV's blocking or subframe on roof, not just the outer skin. If you are uncertain if your RV...
view full answer... - Replacement Return Spring Kit (500094) for Power Gear External Spring RV Leveling Jacks
- The Replacement Return Spring Kit for Power Gear External Spring RV Leveling Jacks # LC359434 is the 500094 spring that you are looking for. The 500094 is an alternate part number for the Replacement Return Spring Kit for Power Gear External Spring RV Leveling Jacks # LC359434. If you are asking if we sell only the spring and not the whole kit, the answer is that the 500094 spring is only available in the kit.
view full answer... - Does the 4500 Watt Portable RV Generator Come With a Muffler
- The 4,500-Watt Portable RV Generator w/ Cover - 3,600 Running Watts - Propane or Gas - Electric Start # 333-0005 does not come with an add on generator silencer muffler, but it does run at a fairly quiet noise level compared to some other generators because of the muffler that is already installed on it. This generator has a 67 dB noise level at 25 feet away when under 1/4 load (60 is normal conversation level) so it isn't going to be overpoweringly loud when used.
If you're looking for...
view full answer... - Does Ventline Exterior Wall Vent for RV Range Hoods V2111-55 Include Insect Screen
- The Ventline Exterior Wall Vent for RV Range Hoods # V2111-55 does not include a screen to block insects but it does have a lockable damper panel that lets you secure the damper when the range hood fan is not in use, such as during storage periods. This feature helps stop drafts that can cause your HVAC system to turn on unnecessarily.
We also have this item in black as part # V2111-55.
Installation requires hardware such as # 31071 (ten screws are needed) as well as a silicone rubber...
view full answer... - How Many Panels Does the Solera Screen Room Come With
- The Solera Screen Room # LC362223 has 3 panels (2 sides and a front). It does also include a skirt that blocks out the bottom of your trailer and essentially uses your trailer as the 4th side of the room. There are also brackets that secure the screen room to your trailer.
Your question got cut off and only part of it came through, if this information did not sufficiently answer what you are needing then please reach back out with the additional information that you need and I would be...
view full answer... - Are All of the Parts and Hardware Included Needed for Install of SportRack Roof Rack SR1020
- If you look at step 15 in the linked instructions for SportRack roof rack # SR1020 you will see the purpose of one of the types of included screws, the lock washers, and the square blocks. This is for isntallation in a track type of system. If you do not have this type of system you will not need the extra parts.
Thule and SportRack instructions are all like this, more pictures than words, so they do not have to print as many pages if different languages. Believe me, I know it can be frustratin...
view full answer... - Does The Ultra-Fab Power Twin II Manual Stabilizer Come With Spacer Blocks
- If you're talking about a space to sit between the mounting brackets of the Ultra-Fab Power Twin II Manual Stabilizer # UF39-941704 and the frame of the trailer then no, this stabilizer does not have spacers. If you're trying to gain more clearance you could have a welder add in a spacer to the frame with some metal tubing but would need to ensure that tube is rated high enough to handle the pressure of the jack pushing against it. You could then use some self-tapping bolts with some Loctite...
view full answer... - Does Lippert Ground Control 3.0 Work With Wireless Remote?
- The Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC358590 comes with the wireless remote you were asking about, and it will be synced to the touchpad when the system is installed.
Essentially,the remote and touchpad are what is required to operate the Ground Control 3.0 and both parts come with the system.
view full answer... - Are Installation Screws Included With The MaxxFan Mini RV Roof Vent MA00-03801?
- The MaxxFan Mini Plus Manual RV Roof Vent # MA00-03801 does indeed include mounting screws. However, it does not include sealants so you will also need LaSalle Bristol Self-Leveling Sealant # 34427034145-1 and Butyl Tape # 344270341410-1 to get a weather-tight seal.
Our returns policy is a bit long, so I have it linked below if you wish to read it in its entirety. That said, the main points are as follows:
-Within 60 days of receipt of your shipment
-New, unused item
-Shipping and handling...
view full answer... - Parts Needed to Tow Trailer with 2017 Toyota Highlander
- The etrailer Hitch with 2" receiver # e98844 you mentioned is a great choice to start off, and this hitch comes with a durable powder coat that will help ensure that it stands up to dings and nicks that might otherwise lead to rust. In addition to a trailer hitch, you'll need a wiring harness, ball mount, hitch ball, hitch pin, clip and potentially a brake controller if the trailer you'll be towing has brakes. For the trailer wiring, I recommend using the Tekonsha # 118449 if you'll only...
view full answer...
Go To Results